Welder – Robot Operator
Job Description
- Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, jacks, cranes, wedges, drift pins, mig welders, and hand tools.
- Verify conformance of workpieces to specifications, using calipers, squares, rulers, and measuring tapes.
- Tack-weld fitted parts together.
- Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
- Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
- Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
- Interpret engineering drawings and blueprints to determine materials requirements and task sequences.
- Set up and operate fabricating machines, such as grinders, or otherwise form and assemble metal components.
Required Experience
- Must have the ability to read and interpret gauges such as, but not limited to calipers, micrometers & etc.
- Must have the ability to read and interpret blueprints.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be willing and able to perform any job assignment as production levels require shifts in job assignments including alternate shift schedules.
Welder – Fabricator
Job Description
- Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jibs, jacks, cranes, wedges, drift pins, mig welders, and hand tools.
- Verify conformance of workpieces to specifications, using calipers, squares, rulers, and measuring tapes.
- Tack-weld fitted parts together.
- Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
- Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
- Position or tighten braces, jacks, clamps, ropes, bolt straps, or bolt parts in position for welding or riveting.
- Interpret engineering drawings and blueprints to determine material requirements and task sequences.
- Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
Required Experience
- Must have the ability to read and interpret gauges such as, but not limited to calipers, micrometers & etc.
- Must have the ability to read and interpret blueprints.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be willing and able to perform any job assignment as production levels require shifts in job assignments including alternate shift schedules.
Quality Coordinator
Job Description
- Work with production team members to help identify problems and make improvements.
- Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers.
- Communicate quality control information to all relevant organizational departments, outside vendors, or contractors.
- Work with customer service to ensure client quality requirements and expectations are fully met.
- Inspect returned products and track defects, test results, or other regularly reported quality control data.
- Notify supervisors and other personnel of production problems, and recommend necessary corrective actions.
- Grade, classify, and sort defective products.
Required Experience
- Must have 1-3 years of Quality Control experience in metal fabrication, welding and machining.
- Must have the ability to read and interpret gages such as, but not limited to calipers, micrometers, CMM, etc.
- Must have the ability to read and interpret blueprints.
- Must be familiar with APQP, PPAP, FMEA, 5 Why.
- Must have experience with Excel.
Required Education
Associates Degree or a minimum of 3 years experience as a quality technician.
Required Characteristics
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be able to lift and pick up 50 pounds.
- Must be able to work in production environments around heavy equipment and machinery.
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
Laser Unloader
Job Description
- Perform General Physical Activities — Perform physical activities that require considerable use of your arms and legs such as lifting, stooping, stacking and organizing parts, deburing, unloading machinery, grinding, tapping, drilling, chamfering, polishing, packaging, sawing, and handling of materials.
- Inspect Equipment, Parts, or Material — Inspect equipment, parts and materials to identify the cause of errors or defects, to sort defective parts, or to count parts.
- Control Machines and Processes — Use either control mechanisms or direct physical activity to operate machines or processes.
- Communicate with Supervisors, Peers, or Subordinates — Provide information to supervisors and co-workers regarding work progress
- Identify Objects, Actions, and Events — Identify information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
- Monitor Processes, Materials, or Surroundings — Monitor and review information from materials and events, to detect or assess production issues.
Required Experience
- Must have 1-2 years of production experience with a Metal Manufacturer.
- Must have the ability to read and interpret gauges such as, but not limited to calipers, micrometers & etc.
- Must have the ability to read and interpret blueprints.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be willing and able to perform any job assignment as production levels require shifts in job assignments including alternate shift schedules.
Press Brake Operator
Job Description
- Read work orders, production schedules, and prints to determine specifications, such as materials to be used, locations of bend lines, orientation of part before bending, and dimensions and tolerances.
- Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
- Examine completed workpieces for defects such as cracked edges and marred surfaces, and sort defective pieces according to types of flaws.
- Start machines, monitor their operations, and record operational data.
- Install, align, and lock specified punches, dies, cutting blades or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
- Operate, Position, align, or secure workpieces against fixtures or stops on machine beds or on dies to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal.
- Lift dies and workpieces to machines manually.
- Adjust machine speeds, forces and back gauges, according to product specifications, and use gauges and CNC controls to make adjustments.
- Clean and lubricate machines.
Required Experience
- Must have 1-2 years of Press Machine (Setup & Operating) experience with a Metal Manufacturer.
- Must have the ability to read and interpret gauges such as, but not limited to calipers, micrometers & etc.
- Must have the ability to read and interpret blueprints.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be willing and able to perform any job assignment as production levels require shifts in job assignments including alternate shift schedules.
Welder – Robot Technician
Job Description
- Program EA1900 and UP6 Motoman robots with NX100 and XCR controllers.
- Diagnose, troubleshoot and correct robot, power source, controller, positioner, and fixture issues.
- Position, align, fit, and weld parts to form complete units and subunits, following blueprints and layout specifications, and using jigs, jacks, cranes, wedges, drift pins, mig welders, and hand tools.
- Verify conformance of workpieces to specifications, using calipers, squares, rulers, and measuring tapes.
- Tack-weld fitted parts together.
- Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
- Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
- Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
- Interperet engineering drawings and blueprints to determine materials, requirements and task sequences.
- Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
Required Experience
- Must have the ability to read and interpret gauges such as, but not limited to calipers, micrometers & etc.
- Must have the ability to read and interpret blueprints.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be willing and able to perform any job assignment as production levels require shifts in job assignments including alternate shift schedules.
3rd Shift Weld Foreman
Job Description
- Ensure all safety policies are being followed and report any unsafe conditions.
- Maintain good housekeeping and ensure all PM are being completed.
- Ensure that all quality control procedures are being followed and finished products meet customer expectations. Perform weekly process audit.
- Ensure line is properly staged before part changeover. Verify operator is following proper production procedures. Ensure daily machine cycle time is met and determine reasons for deficiency. On time delivery to each department.
- Ensure team member is properly trained to operate equipment. conduct progress reports on new employee's weekly. Write and deliver all performance reviews in a timely manner. Use proper employee counseling techniques. Provide additional training/coaching to employees not meeting machine cycle times.
- Pursuit ways to reduce waste and continue to work towards reducing costs.
- Involvement in recruiting new employees.
- Collaborate with Production Supervisor and Human Resources to resolve employee issues. Motivate and inspire to build relationships with team. Have in depth understanding of Triton Metal Products core values and VP's.
Required Experience
- Must be able to read blueprints.
- Must be able to use a tape measure and calipers.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated.
- Must have good communication skills.
- Must have a positive attitude.
- Must be a team player.
Shipping Clerk/Dock Hand/Forklift Driver
Job Description
- Load and unload trucks.
- Pack, assemble, address, stamp, and ship merchandise or material.
- Unpack, verify, and record incoming merchandise or material.
- Arrange appropriate transportation of products.
- Assist customers with shipping inquiries.
- Perform other administrative duties as assigned.
Required Experience
- Previous experience in shipping, logistics, or other related fields.
- Ability to handle physical workload.
- Ability to multitask and prioritize.
- Ability to thrive in fast-paced environment.
- Strong organizational skills.
Required Education
High School Diploma or GED
Required Characteristics
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
(CNC) Computer Numerical Control Operator
Job Description
- Measure dimensions of finished workpieces to ensure conformance to specifications, using precision measuring instruments, templates, and gauges.
- Remove and replace dull cutting tools.
- Mount, install, align, and secure tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments.
- Listen to machines during operation in order to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines to compensate for problems.
- Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
- Stop machines to remove finished workpieces, or to change tooling, setup, or workpiece placement, according to required machining sequences.
- Lift workpieces to machines manually.
- Modify cutting programs to account for problems encountered during operation and save modified programs.
- Calculate machine speed and feed ratios, and the size and position of cuts.
Required Experience
- Must have 1-2 years of experience with a metal manufacturer.
- Must have the ability to read and interpret gauges such as, but not limited to calipers, micrometers & etc.
- Must have the ability to read and interpret blueprints.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be willing and able to perform any job assignment as production levels require shifts in job assignments including alternate shift schedules.
Powder Coat Load / Unloader
Job Description
- Perform general physical activities - Perform physical activities that require considerable use of your arms and legs; such as lifting, stooping, stacking and organizing parts, deburing, unloading machinery, packaging and handling of materials.
- Inspect equipment, parts or material - Inspect equipment, parts and materials to identify the cause of errors or defects, to sort defective parts and to count parts.
- Control machines and processes - Use either control mechanisms or direct physical activity to operate machines or processes.
- Communicate with supervisors, peers or subordinates - Provide information to supervisors and co-workers regarding work progress.
- Identify objects, actions and events - Identify information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
- Monitor processes, materials or surroundings - Monitor and review informatino from materials and events, to detect or assess production issues.
Required Experience
- Must have 1-2 years of production experience with a metal manufacturer.
- Must have the ability to read and interpret gauges such as calipers, micrometers & etc.
- Must have the ability to read and interpret blueprints.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be willing and able to perform any job assignment as production levels require shifts in job assignments including alternate shift schedules.
Part Time Production Team Members
Job Description
- Perform General Physical Activities — Perform physical activities that require considerable use of your arms and legs such as lifting, stooping, stacking and organizing parts, deburing, unloading machinery, grinding, tapping, drilling, chamfering, polishing, packaging, sawing, and handling of materials.
- Inspect Equipment, Parts, or Material — Inspect equipment, parts and materials to identify the cause of errors or defects, to sort defective parts, or to count parts
- Control Machines and Processes — Use either control mechanisms or direct physical activity to operate machines or processes.
- Communicate with Supervisors, Peers, or Subordinates — Provide information to supervisors and co-workers regarding work progress
- Identify Objects, Actions, and Events — Identify information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
- Monitor Processes, Materials, or Surroundings — Monitor and review information from materials and events, to detect or assess production issues.
Required Education
Must be 18 or Older
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
- Must be willing and able to perform any job assignment as production levels require shifts in job assignments including alternate shift schedules.
Part Time - CDL Driver
Job Description
- Drive a tractor-trailer combination or a truck with a capacity of 26,000 GVW, to transport and deliver products and materials.
- Required to package products in preparation for delivery and to load an unload trucks.
- Perform daily cehicle checks to ensure that mechanical, safety, and emergency equipment is in good working order.
- Maintain logs of working hours and of vehicle service and repair status, following applicable state and federal regulations.
- Obtain receipts or signatures for delivered goods and collect payment for services when required.
- Check all load-related documentation to ensure that it is complete and accurate.
- Maneuver trucks into loading or unloading positions, following signals from loading crew and checking that vehicle and loading equipment and properly positioned.
- Secure cargo for transport, using ropes, blocks, chain, binders, or covers.
- Read bills of lading to determine assignment details.
- Report vehicle defects, accidents, traffic violations, or damage to the vehicles.
Required Experience
- Requires commercial drivers' license CDL.
- Must have a clean driving record as well as 2 years of truck driving experience.
Required Education
High School Diploma or GED
Required Characteristics
- Must be motivated and willing to come in early or stay over and work Saturdays to achieve production goals.
- Must have a positive attitude as well as a willingness to pitch in and help fellow team members to achieve production goals.
